|
|
Steel structure of a multi-functional building
Havíř, František ; Pilgr, Milan (referee) ; Štrba, Michal (advisor)
The aim of this master's thesis is to design the steel construction of a multifunctional building in the cadastral area of Brno-Bohunice. Multifunctional building consists of two identical buildings - A and B. Floor plan dimensions are 40.0 x 40.0 meters and height of 33,8 meters. Both objects have the 1st floor of the overall height of 5,0 m, each additional floors 3,5 m. The plan shape of the building is a square 40 x 40 m with bevel in the corners with a length of 8 m. In the middle of the building is roofed atrium 8 x 8 m. The buildings are in the 5th floor connected with the enclosed footbridge with a length of 10.0 meters. The main structure consists of two buildings columns and girders. Columns are alternatively solved as the composite steel and concrete structures with closed section filled with concrete or concreted steel profile. The girders are made of castellated beams. Among the girders are embedded solid panel joists and girders, coupled with the composite steel and concrete slab. Spatial rigidity besides the composite slabs provide rods placed around the atrium and in the corners of the building. The main structure of the footbridge consists of two inclined arched beams on which is placed stringer of the footbridge.
|
|
|
Museum
Orságová, Martina ; Balázs, Ivan (referee) ; Horáček, Martin (advisor)
Thesis contains variants of design and check of the steel structure of museum situated in Brno. The disposition of the building is three storey structure with a story height of 4meters. The building has a rectangular cross looking shape with dimensions 120x80meters. The height of the structure is 21m . Load bearing beams are 6m apart. The main load bearing structure is made of steel beams, truss beams, columns and stiffeners. Global stiffness is provided by concrete cores, composite slabs and stiffeners beams. The roof is designed as a green variant. The facade is made of glass and Corten sheets. Ceilings is designed as steel-concrete composite deck. The main construction material is Steel S235 and Steel S355. The concrete parts are designed from Concrete C25/30.
|
|
|
Multifunctional multi-storey building
Kántor, Albert ; Pešek, Ondřej (referee) ; Horáček, Martin (advisor)
The aim of this thesis is a design of a multifunctional multi-storey building consisting of six floors which is located in Česká Třebová. The floor dimensions of structure are 56,5 x 26,5 m and its height is 22,150 m. The building is covered with green roof. The mail load bearing structure consists of primary beams, secondary beams, columns and vertical bracing. The floor structure is designed as a composite steel and concrete structure. The spatial rigidity of the structure is secured with vertical bracing and rigid concrete roof slab. Main used materials are structural steel S235, S355 and concrete of grade C25/30.
|
|
|
Business and office centre
Novotný, Petr ; Štrba, Michal (referee) ; Pilgr, Milan (advisor)
The aim of this master´s thesis was design and analysis of a steel supporting structure of a building for business and administration purposes in Ostrava. It includes an assessment of the main load-bearing construction elements and the selected connections. The thesis also contains the design documentation of the building and compares two different variants of the steel construction design.
|
|
|
Office Building
Poláček, Petr ; Štrba, Michal (referee) ; Pilgr, Milan (advisor)
Master's thesis is follow up with the disign of the load bearing structure of a office building. The building is designed for the area of Svitavy. The plan's dimension are 54,0 x 54,0 m. The objects has 10 floors. Load-bearing structure is disigned in two variants. In the variant A is centre to centre spacing 6m, in variant the B it si 9m. The coulomns and floor structure are composite steel-concrete. Thesis includes drawings.
|
|
|
Multi-storey car park
Balhar, Martin ; Balázs, Ivan (referee) ; Sýkora, Karel (advisor)
This thesis deals with design of steel structure multi-storey garage. It is the five-storey steel structure of rectangular plan. The construction is designed for the city of Olomouc. Static calculation is solved by a combination of manual calculation and calculation using software Scia engineer 18. There are the following main load bearing structural elements designed and examined in the structural analysis: truss, purlin, bracing, column, composite beam, joints, foot and anchoring. Thesis includes drawing documentation
|
|
|
The Structure of the Atypical Family House in Vrchlabí
Vondráček, Vít ; Hron, Lukáš (referee) ; Šmak, Milan (advisor)
The subject of master’s thesis is design and assessment of steel load-bearing construction of atypical family house in Vrchlabí. Structure is designed as multi-storey steel structure, cooperating with stiff concrete core. The design was considered in four different options which combines possibility of using steel, steel and timber with different way of stiffness for whole structure. There is also composite steel-concrete alternative floor trimmer for selected option. Design and assessment was conducted in accordance with the applicable standards and by using software Scia Engineer.
|
|
|
Production hall with administrative build-in structure
Šenk, Josef ; Štrba, Michal (referee) ; Barnat, Jan (advisor)
My bachelor’s thesis contains design and assessment of steel structure of production hall with build-in administrative part located in Hrušovany u Brna. The dimensions of the ground plan are 12 x 50 m and the height of the structure is 9 m. The supporting structure consists of transverse frames. Distance of each transverse frame is 5 m. The frame structure is made of steel IPE profiles and is designed as a three-hinged frame. All frames are connected by longitudinal bracings. The spatial rigidity of the structure is provided by sway bracings. The dimensions of the ground plan of the build-in administrative part are 11 x 14,75m. The structure of ceiling is designed as steel-concrete composite structure. The steel structure of production hall and build-in administrative part is made of S235 steel.
|
|
| |
|
|
Multi-storey building
Stavrovský, Jiří ; Straka,, Bohumil (referee) ; Sýkora, Karel (advisor)
This thesis deals with design of steel structure multi-storey garage. It is the six-storey steel structure of rectangular plan with dimensions of 35,2 x 83,2 m and a height of 18,5 meters. The structure is designed for the site Brno. Static calculation is solved by a combination of manual calculation and calculation using software Scia engineer. There are the following main load bearing structural elements designed and examined in the structural analysis: truss, purlin, bracing, column, composite beam, joints, foot and anchoring. Thesis includes drawing documentation
|
guest ::
